Honeywell Granit XP 199 i Series, User Manual

Page: 58 / 312

40 Granit XP User Guide
Compatibility Mode
In Compatibility Mode, the scanner can work with HID, SPP, or other Bluetooth
profiles. Bluetooth needs to be set manually before scanning this barcode.
Replace a Linked Scanner
If you need to replace a broken or lost scanner that is linked to a base or an Access
Point, scan the
Override Locked Scanner barcode below with a new scanner and
place that scanner in the base, or scan the Access Point linking barcode. The
locked link will be overridden, the broken or lost scanner’s link with the base or
Access Point will be removed, and the new scanner will be linked.
Communication Between the Cordless System
and the Host
The cordless scanner provides immediate feedback in the form of a “good read”
indication with a green LED on the scanner and an audible beep. The scanner also
vibrates, if programmed to do so. This indicates that the barcode has been scanned
correctly and the base or Access Point has acknowledged receiving the data. This is
possible since the cordless system provides two-way communication between the
scanner and the base or Access Point.
Compatibility Mode
(optional)
Override Locked Scanner
(Single Scanner)