manualshive.com logo in svg

Honeywell Granit XP 199 i Series, User Manual

The Honeywell Granit XP 199 i Series is a robust and reliable industrial barcode scanner designed to withstand the harshest environments. To ensure optimal usage, a comprehensive User Manual is available for free download at manualshive.com, providing detailed instructions and troubleshooting tips.

Share
Download
background image

Granit XP User Guide

iii

RS232 Handshake ................................................................................................................35

RS232 Timeout.......................................................................................................................35

XON/XOFF ...............................................................................................................................36

ACK/NAK...................................................................................................................................36

Scanner to Bioptic Communication .....................................................................................36

Scanner-Bioptic Packet Mode..........................................................................................37

Scanner-Bioptic ACK/NAK Mode....................................................................................37

Scanner-Bioptic ACK/NAK Timeout ..............................................................................37

Chapter 3 - Cordless System Operation .....................................................39

How the Cordless Charge Base Works.................................................................................39

Pair with a Honeywell Vehicle Mount Computer.......................................................39

Legacy Mode ...........................................................................................................................39

Compatibility Mode ..............................................................................................................40

Replace a Linked Scanner ........................................................................................................40

Communication Between the Cordless System 
and the Host...................................................................................................................................40

Program the Scanner and Base or Access Point .............................................................41

RF (Radio Frequency) Module Operation...........................................................................41

System Conditions.......................................................................................................................42

Page Button....................................................................................................................................43

Temporary Streaming Presentation Timeout .............................................................43

Charge Information.....................................................................................................................44

Battery Information for the Granit XP 1991iSR and 1991iXR ...................................44

Battery Recommendations ................................................................................................44

Safety Precautions for Lithium Batteries.....................................................................44

Proper Disposal of the Battery .........................................................................................45

Beeper and LED Sequences and Meaning ........................................................................45

Scanner Communication and Scanning......................................................................46

Base/Access Point Communication and Scanning .................................................47

Base Power Communication Indicator .........................................................................47

Base Charge Status ..............................................................................................................48

About the Bluetooth Status and Battery Icons.................................................................48

About the Bluetooth Status Icon .....................................................................................49

Summary of Contents for Granit XP 199 i Series

























































































































































































































































































































Reviews:

No comments

Related manuals for Granit XP 199 i Series

Hand Held Products Quick Check PC600 Specifications preview
Quick Check PC600
Brand: Hand Held Products Pages: 2
Ortus Lind-EM Operating Manual preview
Lind-EM
Brand: Ortus Pages: 11
RIOTEC RIOSCAN iCR6307AS Quick Manual preview
RIOSCAN iCR6307AS
Brand: RIOTEC Pages: 6
Sumo ST390 Operation Manual preview
ST390
Brand: Sumo Pages: 8
Viking InterWorks IntelliFlash Quick Start Manual preview
IntelliFlash
Brand: Viking InterWorks Pages: 10
Datalogic MAGELLAN 8300 Product Reference Manual preview
MAGELLAN 8300
Brand: Datalogic Pages: 558
AEG ID ARE H9 BLE Manual preview
ID ARE H9 BLE
Brand: AEG Pages: 17
Unitech MS840 User Manual preview
MS840
Brand: Unitech Pages: 65
Laser iRANGE IR-UNIREAD User Manual preview
iRANGE IR-UNIREAD
Brand: Laser Pages: 7
APLIC 301781/20170214SZ129 User Manual preview
301781/20170214SZ129
Brand: APLIC Pages: 52
Godex GS500 Quick Start Manuals preview
GS500
Brand: Godex Pages: 2
Godex EZPi1000 Series User Manual preview
EZPi1000 Series
Brand: Godex Pages: 46
Godex EZ2050 User Manual preview
EZ2050
Brand: Godex Pages: 46
Approx APPEB04G User Manual preview
APPEB04G
Brand: Approx Pages: 13
Approx appLS06OMNI User Manual preview
appLS06OMNI
Brand: Approx Pages: 16
RocketFish RF-CRDRD Guía De Instalación Rápida preview
RF-CRDRD
Brand: RocketFish Pages: 2
Certance LTO Autoloader Installation Manual preview
LTO Autoloader
Brand: Certance Pages: 8
ICO CCD-800 Manual preview
CCD-800
Brand: ICO Pages: 48

Brands by name

Popular brands

Load more brands