Honeywell FUSION III DVR, User Manual, Page: 56 / 168

FUSION III DVR Digital Recording and Transmission System
5–12
5.5 FRAME SETUP
The Frame Setup menu gives the user the option to adjust both the resolution and the
number of images per second each camera will record. When setting up the FPS
sliders, the BLUE slider represents the frames in which the DVR will capture the
incoming video at while the RED slider represents the frame rate that will be recorded.
This option is beneficial when higher frame rates are desired remotely. The Server will
only send out frames remotely that have been first encoded. For Ex. If the Blue
‘ENCODING’ option is set to 25 FPS and the Red ‘RECORDING’ option is set to 7
PPS then the DVR Server will record 7 PPS and users viewing live video remotely will
receive 25 PPS on that specific camera. Please note that there are two different Fame
Setup windows for low end and high end models, the picture below illustrates the high-
end Frame Setup.
NOTE:
The Software will not allow the maximum available Frames to be exceeded.
NOTE: The RED FPS record slider cannot exceed the BLUE FPS capture slider.
5.5.1 FRAME SETUP (HIGH-END)