Honeywell FUSION III DVR, User Manual

Page: 11 / 168

NOTES ON CLEANING
•
Use a soft dry cloth for cleaning.
•
For stubborn dirt, soak the cloth in a weak detergent solution, wring well and wipe. Use a dry cloth
to wipe it dry. Do not use any type of solvent, such as thinner and benzene, as they may damage
the surface of the DVR unit.
•
If you use a chemical saturated cloth to clean the unit, follow that product’s instructions.
NOTES ON MAINTENANCE
This DVR unit is designed to last for long periods of time. To keep your DVR unit always operational we
recommend regular inspection maintenance (cleaning parts or replacement). For details contact your
nearest dealer.
NOTES ON MOISTURE CONDENSATION
Moisture condensation damages the DVR unit. Read the following information carefully.
Moisture condensation occurs during the following cases:
•
When you bring the DVR unit directly from a cold place to a warm place.
•
When you use the DVR unit in a room where you just turned on the heater, or a place where the
cold wind from the air conditioner directly hits the unit.
•
In the summer, when you use the DVR unit in a hot and humid place just after you move the unit
from an air conditioned room.
•
When you use the DVR unit in a humid place.
Do not use the DVR unit when moisture condensation may occur.
If you use the DVR unit in such a situation, it may damage discs and internal parts. Remove any CD
discs, connect the power cord of the DVR unit to the wall outlet, turn on the DVR unit, and leave it for
two to three hours. After two to three hours, the DVR unit will have warmed up and evaporated any
moisture. Keep the DVR unit connected to the wall and moisture will seldom occur.