NFS Supra
Page 46
HLS-MN-025 v.04
Installation and Operating Manual
www.honeywelllifesafety.es
www.hoeywelllifesafety.es
Optional Relay cards configuration
The relay cards connected to the
Auxiliary Modules
bus must be configured to enable them, the
correct number of cards must be enabled and configured.
If the number of cards enabled/configured is different from the installed, the control panel will
indicates
System Fault
.
To increase or decrease the number of cards, press
Z1 push-button
cyclically.
Zone led
Z1 = Z2 = Z3
= OFF =
0
VSN-4REL cards (without cards enabled)
Z1 (Red)
= ON =
1 VSN-4REL
card (with one card enabled)
Z1 + Z2 (Red)
= ON =
2 VSN-4REL cards (with two cards enabled)
Z1 + Z2 + Z3 (Red)
= ON =
3 VSN-4REL cards (with three cards enabled)
Number of VSN-4REL
relay cards selection
0, 1, 2 or 3
Configuration
