NFS Supra
Page 10
HLS-MN-025 v.04
Installation and Operating Manual
www.honeywelllifesafety.es
www.hoeywelllifesafety.es
2.1 Keypad and Led indicators
The control keys and system status leds are located at the front panel. The leds are used to know the system status. All the information, according to the standard
requirements, is clearly visualized by means of these leds.
The key to enable access to system to operator level (Access Level 2) is also locates at
the front panel.
The front panel is divided into three areas: General Status Indicators, Indicators and zone
push-buttons and control keypad.
2.1.1 Buzzer
NFS Supra control panel has an internal buzzer to warn about events, as follows:
-
Buzzer steady:
Alarm registered in a zone or Evacuation activated.
-
Intermittent Buzzer*1:
System fault.
Press Buzzer mute key from Access level 1 or 2 in order to silence the buzzer
.
(*1) The buzzer has an 8-minute delay to indicate 220Vac faults.
Operation
General
Status
Indicators
Keyswitch
Access level 2
(Operator)
Fault
Alarm
Normal or
Buzzer Mute
