Honeywell EQUIP HD3HDIHX, User Manual, Page: 73 / 116

HD3 equIP
®
Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide
Document 800-07361V5 Rev A 73
07/2013
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply .
Figure 4-31 Camera Setup
Basic Camera Setup Procedure
1. Aim and focus the camera using the test video output.
2. Create a typical scene. Add the motion, scene complexity, and lighting levels (day or
night) expected in normal operation.
3. Using the camera web client application, open the Camera Setup tab, and adjust the
image parameters—brightness, color, AGC (gain)—to achieve the desired exposure
and white balance.
4. Open the Compression Settings tab, and enable Statistics .
5. Select the resolution, frame rate, and priority mode (Quality, Bit Rate, or Frame Rate).
a. Is the delivered picture quality, bit rate, and frame rate acceptable with the
appropriate motion, scene complexity, and day/night transitions?
Yes - Then camera setup is complete.
No - Then additional configuration is required.
b. If the delivered bit rate is close to the maximum bit rate, then can you
increase the maximum bit rate value
?
Yes - Then increase the maximum bit rate and return to 5a.
No - Then set the compression ratio to High or Maximum, then return to 5a.
c. Can you increase the target bit rate value?
Yes - Then increase the target bit rate, and return to 5a.
No - Then reduce the resolution and/or frame rate.