manualshive.com logo in svg

Honeywell EQUIP HD3HDIHX, User Manual, Page: 2 / 116

Share
Download
Honeywell EQUIP HD3HDIHX User Manual Download Page 2

Revisions

Issue

Date

Revisions

V2 Rev A

11/2011

New version of the User Guide for HD3 H.264 cameras. Added the HD3HDIH(X) and 
HD3MWIH(X) models. 

This document replaces 800-07361V1. Added a note advising that the camera should 
not be connected to two different power sources at the same time. Changed how 
many Administrators/Users can be logged on at the same time. Changed the length 
of time you have to hold down the Factory Reset button. Added a FAQ advising to 
disable any antivirus software if there is problems with installing the IP Utility software. 

Also added the information for installing the Honeywell IP Utility on Windows 7. And 
added Frame Rate to the list of available priority settings in the Compression Settings 
section. 

V3 Rev A

11/2011

Removed a sentence in Specifications which states that only 4 users can log on at a 
time. Removed notes throughout that referred to a limited number of users that can 
be logged on at a time. Updated the System Requirements. Added the step for 
Enabling Microsoft .NET Framework 3.5 to the Install Honeywell IP Utility Software 
section. Expanded on the Disable User Account Control section. Added WDR and 
LDC to the Auto Exposure Settings table. Changed the Immunity Regulatory 
specification from EN 50024 to 50130-4. 

V4 Rev A

08/2012

Changed "EQUIP" to "equIP". Updated the PC Minimum System Requirements. 
Updated the Secondary Stream Video Codec Settings section. Updated the 
Configuring Motion Detection section. 

Updated the method for connecting to the Honeywell Download Center and installing 
the IP Utility software. 

V5 A

07/2013

Updated URLs on back cover. 

Added the Angles of View for the HD3MDIH camera.

Updated the Mount option. 

Updated the method for finding the User Guide. 

Changed "Honeywell Camera ActiveX Software" to "Honeywell PSIA IP ActiveX 
Software". 

Added notes about the removal of the credentials window for V49 or higher.

Updated the descriptions of ELC, ALC, and DSS, and of the descriptions of White 
Balance. 

Updated Specifications for the cameras, including the minimum illumination for all 
cameras, the power consumption, the temperatures for all cameras, the Primary 
Stream Resolutions, the AES/ELC .

Moved the "Uninstalling the ActiveX" section from Chapter 3 to Chapter 4, as well as 
all Web Client information to Chapter 4. 

Added the HD3MDIH01 and HD3MDIH02 options in the Specifications section, and to 
the Introduction. 

Updated the Regulatory for all cameras. 

Added the dimension diagrams for the camera plus the pendant mount to the 
Specifications section. 

Added a note about the automatic installation of a signed version of ActiveX when 
users log onto the Honeywell IP Utility for the first time.

Changed the Conformance from LVD 2006/95/EC to GPSD 2001/95/EC.

Changed the settings and description of DNR. 

Added information about D/N Control and Alarm Interlock Day/Night Switching. 

2

Summary of Contents for EQUIP HD3HDIHX





















































































































Reviews:

No comments