Honeywell EQUIP HD3HDIHX, User Manual, Page: 27 / 116

HD3 equIP
®
Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide
Document 800-07361V5 Rev A 27
07/2013
Note If your installation involves a 24 V AC power source, then please wait
approximately 60 seconds after connecting to a power source for video to
appear on the local video out.
2. Connect the supplied video cable to the local video out connector to view the video
signal on a standard monitor (see
Figure 2-8 ) below to connect a local video monitor).
3. Loosen the setscrew that locks the gimbal assembly in place (see Figure 2-8 ) to
adjust the horizontal rotation.
Figure 2-8 Gimbal Adjustment - Gimbal Top View
4. Adjust the gimbal assembly to the desired view. Adjust the horizontal, pan, and tilt
rotations so that the area of interest is at the center of the field of view. See
Figure 2-9
on page 28 .
HD3MDIH, HD3MWIH(X) Top view
Loosen set screw to adjust Tilt Rotation
Local
video
out
HD3HDIH(X) Top view (Auto Focus)
Local
video
out
Set focal
length
(bottom)
Adjust
focus
(top)