Honeywell EQUIP HD3HDIHX, User Manual, Page: 71 / 116

HD3 equIP
®
Series H.264 Indoor High Resolution True Day/Night IP Dome Camera User Guide
Document 800-07361V5 Rev A 71
07/2013
Table 4-9 Selecting Quality, Bit Rate, or Frame Rate
.
Selecting Quality for Priority
When Quality is selected as the priority, you can adjust the Compression Ratio and/or the
Maximum Bit Rate .
Figure 4-28 Quality Settings
Selecting Bit Rate for Priority
When Bit Rate is selected as the priority, you can adjust the Target Bit Rate .
Figure 4-29 Bit Rate Settings
Select this Priority
field setting Field Setting Description
Quality
(see Selecting
Quality for Priority
on page 71 )
Maximum Bit Rate
The Target Bit Rate field
is grayed out.
The camera maintains the picture quality
until the bit rate delivered exceeds the
Maximum Bit Rate (MBR), at which point
the camera drops frames to ensure that
the MBR is not exceeded.
Bit Rate
(see Selecting Bit
Rate for Priority on
page 71 )
Target Bit Rate
Maximum Bit Rate and
Compression Ratio fields
are grayed out.
The camera adjusts the picture quality to
ensure that the bit rate delivered does not
exceed the Target Bit Rate (TBR), at
which point the camera drops frames to
ensure that the TBR is not exceeded.
Frame Rate
(see Selecting
Frame Rate for
Priority
on page 72 )
Target Bit Rate
Maximum Bit Rate and
Compression Ratio fields
are grayed out.
The camera maintains the selected frame
rate while adjusting image quality to meet
the TBR. This mode allows the actual bit
rate to fluctuate beyond the user-defined
TBR while maintaining the selected frame
rate.
Quality is selected.
Compression Ratio Default setting is Medium . Selecting Minimum or Low will
increase overall picture quality and increased delivered bit rate.
Default setting is Medium . Selecting Minimum or Low will
increase overall picture quality and increased delivered bit rate.
Maximum Bit Rate
If the maximum bit rate exceeds the current threshold, the
frame rate will drop.
Bit Rate is selected.
Target Bit Rate
Increasing or decreasing the target bit rate threshold will
increase or decrease the picture quality accordingly. If the
target bit rate is exceeded, the frame rate will drop.