Honeywell ACUIX ES, Installation And Configuration Manual

Page: 34 / 86

34
Installing the ACUIX ES
Setting the Baud Rate, Parity and Protocol (SW2 and SW3)
1. Set the baud rate and parity on SW2. See Figure 2-1 . Carefully place the SW2 switch
in the required positions if different from the defaults.
• To make changes to the default, use Table 2-3 and see Figure 2-2 and Table 2-2
for examples.
2. Set the protocol on SW3. See Figure 2-1 . Carefully place the SW3 switch in the
required positions if different from the defaults.
• To make changes to the default, use Table 2-4 and see Figure 2-2 and Table 2-2
for examples.
Table 2-3 DIP Switch Baud Rate and Parity Settings (SW2 1 - 6)
Baud Rate
and Parity
Values Baud Rate Switch Position Parity Switch
Position
1 2 3 4 5 6
600 OFF OFF OFF OFF
1200 ON OFF OFF OFF
2400 OFF ON OFF OFF
4800 ON ON OFF OFF
9600 OFF OFF ON OFF
19200 ON OFF ON OFF
38400 OFF ON ON OFF
57600 ON ON ON OFF
115200 OFF OFF OFF ON
None OFF OFF
Even ON OFF
Odd OFF ON