Honeywell ACUIX ES, Installation And Configuration Manual

Page: 27 / 86

Document 800-01949 Rev D 27
05/09
2
Installing the ACUIX ES
In this section:
• Installation Warnings and Cautions , page 27 .
• DIP Switch Default Settings and Locations , page 28 .
• Selecting Video Over Coaxial Cable or Unshielded Twisted Pair (SW1) , page 33 .
• Setting the Baud Rate, Parity and Protocol (SW2 and SW3) , page 34 .
• Setting the RS485 Control Data Termination (SW5) , page 35 .
• Setting the Dome Address (SW4) , page 35 .
• Connecting the Power and RS485 Data Wiring , page 37 .
• Connecting the Optional Contact Input Wiring , page 39 .
• Installing Indoor Pendant or Surface Domes , page 40 .
• Installing In-Ceiling Domes , page 43 .
Installation Warnings and Cautions
Note Also see Cabling Recommendations and Cautions , page 20 .
All installations must be performed by qualified technical personnel and must be
in accordance with all national and local mechanical and electrical codes.
Ensure the mounting surface and installation hardware can hold the combined
weight of the scan assembly, housing, lower dome and mount.
To prevent damage to the interface board, follow standard industry precautions
for electrostatic discharge-sensitive devices.