background image

4 - 3

To Clear One or All Prefixes or Suffixes:

You can clear a single prefix or suffix, or clear all prefixes/suffixes for a symbol-
ogy.  When you Clear One Prefix (Suffix), the specific character you select is 
deleted from the symbology you want. When you Clear All Prefixes (Suffixes), 
all the prefixes or suffixes for a symbology are deleted.

Step 1.

Scan the 

Clear One Prefix

 or 

Clear One Suffix

 symbol.

Step 2.

Determine the 2 digit Hex value from the Symbology Chart (see page 

A-1

) for the symbology from which you want to clear the prefix or suffix.

Step 3.

Scan the 2 digit hex value from the 

Programming Chart

 inside the back 

cover of this manual or scan 

9

9

 for all symbologies.

Your change is automatically saved.

To Add a Carriage Return Suffix to all Symbologies

Scan the following barcode if you wish to add a carriage return suffix to all sym-
bologies at once.  This action first clears all current suffixes, then programs a 
carriage return suffix for all symbologies.

Add CR Suffix

All Symbologies

Summary of Contents for 4600g

























































































































































































































































Reviews: