Honeywell 4600g, User Manual

Page: 54 / 248

3 - 6
Scan Stand Mode
When a unit is in Scan Stand mode, it remains idle as long as it sees the Scan
Stand symbol (see below). When a different code is presented, the imager is
triggered to read the new code.
Note: The imager automatically adjusts the illumination LEDs to the lowest light
level possible to maintain a good lock on the Scan Stand symbol. When
a symbol is presented, the imager’s light levels adjust to the saved setting
(see
LED Power Level on page 3-10). This mode requires at least 50 lux
of ambient light to operate correctly.
Scan Stand Symbol
When a unit is in Scan Stand mode, the LEDs shine at the Scan Stand symbol
on the base of the stand which tells it to remain idle.
When the Scan Stand
symbol is covered, the imager turns the LEDs on at the configured power level
(default setting is high) and attempts to find and decode barcodes in its field of
view.
Scan Stand Mode
Scan Stand Symbol