www.sperianprotection.com
• Put the mask on your face starting at your chin.
• First, place the lower headstrap around the neck below the ears,
then place the upper headstrap above the ears.
• Mould the nose area to the
shape of the face.
• Move smoothly, right and left,
up and down, in order to
achieve the optimal position
of the mask on the face.
• Check for leaks (Facial fit) as follows:
• Place both hands over the mask
and inhale sharply.
• If you feel air entering around the
edges, tighten the nose-piece and/or
increase tension of the headstraps.
1
2
3
4
5
HOW TO FIT
A SINGLE-USE MASK?
• Cup the mask in the hand.
+
Valve membrane protected against impacts
+
Pre-formed upper part: excellent fit and leaktightness
+
No nose-bridge: very simple to use
+
Twin elastics stapled outside the filtering area
+
Latex, Silicone and PVC-free
+
Each mask meets the requirements of:
> EN 149: 2001 standard
> 120 mg loading test
> > >
SPErIan ProtECtIon EuroPE (SaS)
Immeuble Edison - Paris Nord 2
33, rue des Vanesses - BP 55288 Villepinte
95958 Roissy CDG Cedex - France
Phone: +33 (0)1 49 90 79 79
Fax: +33 (0)1 49 90 71 38
SPErIan ProtECtIon (uK) LtD
Unit 3 Elmwood
Chineham Park Basingstoke
RG 24 8WG - United Kingdom
Phone: +44 (0) 1256 693 200
Fax: +44 (0) 1256 693 300
WarnIngS:
• A beard may reduce the effectiveness of single-use masks
• The mask must be discarded after a single use (one shift maximum)
• A well fitted single-use mask guarantees efficient protection
!
SPErIan SuPEronE rangE - FIttIng InStruCtIonS
onE SIzE FItS aLL - avaILabLE In FFP1 anD FFP2
WIth anD WIthout vaLvE