10-2
Date of Issue: April 2008
WDP30X
b. CONNECTING ROD
DISASSEMBLY
1. Remove the roll pin and place the upper rod end
lightly in a vise.
2. Remove the bolt securing the spring and lower rod
end assembly.
ASSEMBLY
1. Place the upper rod end in a vise using slight
pressure.
2. Apply Hondalock to the threads of the bolt, and pass
the bolt through the lower rod end, inner ring, and
spring.
3. Tighten the bolt to compress the spring until the
assembly has an overall height of 300 mm (11.8 in).
4. Align the roll pin holes and install the roll pin.
ROLL PIN
UPPER ROD
END
SPRING
INNER RING
LOWER ROD
END
BOLT
GREASE NIPPLE
300 mm
(11.8 in)
Summary of Contents for WDP30X
