7-2
Date of Issue: April 2008
WDP30X
b. ADJUSTMENT
IGNITION COIL
Adjustment is required only when the ignition coil or the
flywheel has been removed.
1. Loosen the ignition coil bolt.
2. Insert the feeler gauge between the ignition coil and
flywheel.
3. Push the ignition coil firmly against the flywheel and
tighten the ignition coil bolt. Remove the feeler gauge.
c. INSPECTION
IGNITION COIL
<Primary side>
Measure the resistance of the primary coil by attaching
one ohmmeter lead to the ignition coil’s primary (black)
lead while touching the other lead to the iron core.
<Secondary side>
Remove the spark plug cap. Measure the resistance of the
secondary side of the coil by attaching one ohmmeter lead
to the ignition coil terminal and the other lead at the spark
plug cap end.
Specified clearance
0.2 ~ 0.6 mm
(0.008 ~ 0.024 in
Primary side resistance
0.8 ~ 1.0
Secondary side resistance
5.9 ~ 7.1 k
0.2~ 0.6 mm
(0.008 ~ 0.024 in)
FLYWHEEL
IGNITION COIL
Summary of Contents for WDP30X
