Honda NT1100A 2021 Manual Download

Page: 258 / 325

Drive Chain

Inspecting the Drive Chain

Slack

Check the drive chain slack at several points

along the chain. If the slack is not constant at all

points, some links may be kinked and binding.

Have the chain inspected by your dealer.

Shift the transmission to Neutral. Stop the

engine.

Place your vehicle on its centre stand on a

firm, level surface.

Push the lower part of the drive chain down

and check the chain slack between the drive

chain and swing-arm at the end of the drive

chain slider.

Drive chain slack:

70 - 75 mm (2.8 - 3.0 in)

Do not ride your vehicle if the slack

exceeds 80 mm (3.1 in).

Rotate the rear wheel and check that the

chain moves smoothly.

Inspect the sprockets.

P. 236

Clean and lubricate the drive chain.

P. 237

20210720104559_32MLF6000_eng_BOOK Page 258 Tuesday, July 20 2021 10:54:27 JST

Maintenance

255

Drive chain slider

Drive chain

Swing-arm

Summary of Contents for NT1100A 2021






































































































































































































































































































































Search results

Summary of Contents for NT1100A 2021

Reviews:

Related manuals for NT1100A 2021

Brands by name

Popular brands

Honda NT1100A 2021, Manual

Search results

Summary of Contents for NT1100A 2021

Reviews:

Related manuals for NT1100A 2021

Brands by name

Popular brands