Honda NT1100A 2021 Manual Download

Page: 13 / 325

ACCESSORIES AND LOADING WARNING LABEL

WARNING

ACCESSORIES AND LOADING

•

The safety stability and handling of this vehicle may be affected by the

addition of accessories and luggage.

•

Read carefully the instructions contained in user's manual and

installation guide before installing any accessory.

•

The total weight of accessories and luggage added to rider's and

passenger's weight should not exceed

194 kg (428 lb)

, which is the

maximum weight capacity.

•

The luggage weight must not exceed

21 kg (46 lb)

under any

circumstances.

•

The fitting of large fork-mounted or large handlebar mounted fairing is

not recommended.

REAR CUSHION LABEL

GAS FILLED

Do not open. Do not heat.

20210720104559_32MLF6000_eng_BOOK Page 13 Tuesday, July 20 2021 10:54:27 JST

Image Labels

Vehicle Safety

Summary of Contents for NT1100A 2021






































































































































































































































































































































Search results

Summary of Contents for NT1100A 2021

Reviews:

Related manuals for NT1100A 2021

Brands by name

Popular brands

Honda NT1100A 2021, Manual

Search results

Summary of Contents for NT1100A 2021

Reviews:

Related manuals for NT1100A 2021

Brands by name

Popular brands