Honda NT1100A 2021 Manual Download Page 222

Page: 222 / 325

Refuelling

Do not fill with fuel above the level plate.

Fuel type:

Unleaded petrol only

Fuel octane number:

Your vehicle is

designed to use Research Octane Number

(RON) 91 or higher.

Tank capacity:

20.4 L (5.39 US gal, 4.49 Imp

gal)

Refuelling and Fuel Guidelines

(

P.16

)

Opening the Fuel Fill Cap

Open the lock cover, insert the ignition key,

and turn it clockwise to open the fuel fill cap.

Closing the Fuel Fill Cap

After refuelling, push the fuel fill cap closed

until it locks.

Remove the key and close the lock cover.

The key cannot be removed if the fuel fill

cap is not locked.

WARNING

Petrol is highly flammable and

explosive. You can be burned or

seriously injured when handling fuel.

•

Stop the engine, and keep heat,

sparks, and flames away.

•

Only handle fuel outdoors.

•

Wipe up spills immediately.

20210720104559_32MLF6000_eng_BOOK Page 222 Tuesday, July 20 2021 10:54:27 JST

Operation Guide

219

Ignition key

Lock cover

Fuel fill cap

Level plate

Summary of Contents for NT1100A 2021






































































































































































































































































































































Search results

Summary of Contents for NT1100A 2021

Reviews:

Honda NT1100A 2021, Manual, Page: 222 / 325

Search results

Summary of Contents for NT1100A 2021

Reviews: