NSR150SP Maintenance
______________________________________________
3-16
With the motorcycle upright on the level
ground, check the oil level through the
inspection window.
If the level is below or near the lower
level line, remove the oil tiller cap and
add the recommended oil up to the upper
level line.
RECOMMENDED TRANSMISSION OIL:
Honda 4-stroke oil or equivalent motor oil
certified to meet APE service classification
SE, SF or SG Viscosity: SAE 10W-40.
NOTE
•
Other viscosities shown in the chart may be used
when the average temperature in your riding
area is within the indicated range.
Reinstall the oil filler cap.
For engine oil change, see below.
OIL CHANGE
NOTE
•
Change the engine oil with the engine warm
and the motorcycle on its side stand to assure
complete and rapid draining.
Engine and exhaust system parts
become very hot and remain hot for some time after the engine is run. Wear
insulated groves or wait until the engine
and exhaust system have cooled before
handling these parts.
Remove the lower cowl.
Warm up the engine.
Place an oil drain pan under the engine
to catch the oil, then remove the oil
drain bolt and oil filler cap.
http://mototh.com