Basic Operation & Riding
78
Starting & Stopping the Engine
The recoil starter is used to start the engine when the battery is low.
To operate the recoil starter:
1. Turn the ignition switch to ON and engine stop switch to RUN.
2. Check that the transmission is in neutral.
3. Grasp the starter grip (1) firmly, then pull it out slowly
approximately 4 in (100 mm).
4. Pull the grip up briskly and fully.
5. After the engine starts, allow the starter grip to return slowly and
then let go.
If the starter grip does not return smoothly (because of dirt in the
assembly), see your dealer.
Using the Recoil Starter (Canada only)
RIGHT SIDE
(1)
(1) starter grip
20 TRX420TM1 FM1 FM2-31HR36600.book 78 ページ 2019年4月5日 金曜日 午前11時56分
Summary of Contents for FourTrax Rancher TRX420FM1 2020
Page 10: ...20 TRX420TM1 FM1 FM2 31HR36600 book 9 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 74: ...Before Riding 64 20 TRX420TM1 FM1 FM2 31HR36600 book 64 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 202: ...Servicing Your Honda 192 20 TRX420TM1 FM1 FM2 31HR36600 book 192 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 273: ...PRINTED IN USA WPCXXXX 2019 XX L 00X31 HR3 6600 31HR3660 ...