Servicing Your Honda
135
Front Final Gear Oil (Except
TRX420TM1)
1. Park your ATV on a firm, level surface.
2. Place an oil drain pan under the oil drain bolt (1).
3. Remove the oil fill cap (2), O-ring, drain bolt and sealing washer.
4. After the oil has completely drained, reinstall the drain bolt with
a new sealing washer and tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
5. Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 202).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
6. Fill the front final gear with the recommended oil.
7.1 US oz (210 cm
3
)
Make sure the oil level is at the lower edge of the oil fill inspection
hole (3).
7. Coat a new O-ring with grease and install it into the fill cap
groove and tighten it to the specified torque:
9 lbf·ft (12 N·m , 1.2 kgf·m)
(2)
(1) oil drain bolt
(3)
FRONT
(2) oil fill cap
(3) oil fill inspection hole
(1)
20 TRX420TM1 FM1 FM2-31HR36600.book 135 ページ 2019年4月5日 金曜日 午前11時56分
Summary of Contents for FourTrax Rancher TRX420FM1 2020
Page 10: ...20 TRX420TM1 FM1 FM2 31HR36600 book 9 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 74: ...Before Riding 64 20 TRX420TM1 FM1 FM2 31HR36600 book 64 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 202: ...Servicing Your Honda 192 20 TRX420TM1 FM1 FM2 31HR36600 book 192 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 273: ...PRINTED IN USA WPCXXXX 2019 XX L 00X31 HR3 6600 31HR3660 ...