Basic Operation & Riding
75
Starting & Stopping the Engine
If the engine fails to start after repeated attempts, it may be flooded
with excess fuel. To clear a flooded engine:
1. Leave the engine stop switch set to RUN (
e
).
2. Open the throttle fully.
3. (USA)
Press the start button for 5 seconds.
(Canada)
Press the start button for 5 seconds (or operate the recoil starter
several times).
4. Follow the normal starting procedure.
5. If the engine starts, then open the throttle slightly if idling is
unstable.
If the engine does not start, wait 10 seconds, then follow steps
1 – 4 again.
If the engine still won’t start, refer to
If Your Engine Quits or Won’t
Start
, page 206.
Your vehicle’s banking (lean angle) sensor system is designed to
automatically stop the engine if the vehicle is overturned.
Before restarting the engine, you must turn the ignition switch to the
OFF (
w
) position and then back to ON (
q
). The engine will not restart
until you perform this procedure.
Flooded Engine
Bank Angle Sensor Ignition Cut-off System
20 TRX420TM1 FM1 FM2-31HR36600.book 75 ページ 2019年4月5日 金曜日 午前11時56分
Summary of Contents for FourTrax Rancher TRX420FM1 2020
Page 10: ...20 TRX420TM1 FM1 FM2 31HR36600 book 9 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 74: ...Before Riding 64 20 TRX420TM1 FM1 FM2 31HR36600 book 64 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 202: ...Servicing Your Honda 192 20 TRX420TM1 FM1 FM2 31HR36600 book 192 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 273: ...PRINTED IN USA WPCXXXX 2019 XX L 00X31 HR3 6600 31HR3660 ...