Servicing Your Honda
130
Engine Oil & Filter
6. Reinstall the oil filter cover, making sure the bolts are tightened
to the specified torque:
7 lbf·ft (10 N·m , 1.0 kgf·m)
7. Pour the drained oil into a suitable container and dispose of it in
an approved manner (page 202).
NOTICE
Improper disposal of drained fluids is harmful to the environment.
Add Engine Oil:
1. Reinstall the oil drain bolt with the new sealing washer and
tighten it to the specified torque:
18 lbf·ft (25 N·m , 2.5 kgf·m)
2. Fill the crankcase with the recommended grade oil
approximately:
2.9 US qt (2.7 ℓ)
3. Reinstall the oil fill cap/dipstick.
4. Start the engine and let it idle for 3 – 5 minutes.
5. Stop the engine, wait 2 – 3 minutes and check the oil level. Make
sure the oil is between the upper and lower level marks on the oil
fill cap/dipstick. If necessary, add more oil but do not overfill.
6. Check that there are no oil leaks.
7. Install the tank cover assembly.
8. Install the seat.
9. Install the oil check lid.
If a torque wrench is not used for installation, see your dealer as
soon as possible to verify proper assembly.
20 TRX420TM1 FM1 FM2-31HR36600.book 130 ページ 2019年4月5日 金曜日 午前11時56分
Summary of Contents for FourTrax Rancher TRX420FM1 2020
Page 10: ...20 TRX420TM1 FM1 FM2 31HR36600 book 9 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 74: ...Before Riding 64 20 TRX420TM1 FM1 FM2 31HR36600 book 64 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 202: ...Servicing Your Honda 192 20 TRX420TM1 FM1 FM2 31HR36600 book 192 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 273: ...PRINTED IN USA WPCXXXX 2019 XX L 00X31 HR3 6600 31HR3660 ...