Servicing Your Honda
186
Battery
6. Remove the battery and take care not to drop the terminal nuts.
7. Charge the battery (see following section).
8. Store your battery in an easy-to-reach location off the floor, in an
area protected from freezing temperature and direct sunlight.
9. Clean the compartment after removing the battery for storage.
Dry the compartment.
10. Slow charge the battery (see following section) once every 30
days.
Installation
1. Check that the battery rubber (5) for damage. If necessary,
replace the battery rubber.
2. Make sure the battery rubber is properly installed.
3. Reinstall in the reverse order of removal.
Be sure to connect the positive (+) terminal first, then the
negative (–) terminal.
4. Make sure all bolts and other fasteners are secure.
5. Install the removed parts in reverse order of removal.
(5) battery rubber
(5)
20 TRX420TM1 FM1 FM2-31HR36600.book 186 ページ 2019年4月5日 金曜日 午前11時56分
Summary of Contents for FourTrax Rancher TRX420FM1 2020
Page 10: ...20 TRX420TM1 FM1 FM2 31HR36600 book 9 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 74: ...Before Riding 64 20 TRX420TM1 FM1 FM2 31HR36600 book 64 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 202: ...Servicing Your Honda 192 20 TRX420TM1 FM1 FM2 31HR36600 book 192 ページ 2019年4月5日 金曜日 午前11時56分 ...
Page 273: ...PRINTED IN USA WPCXXXX 2019 XX L 00X31 HR3 6600 31HR3660 ...