Honda EU 1000i Owner'S Manual Download | Manualshive

Page: 77 / 92

background image

75

TECHNICAL & CONSUMER INFORMATION

Exclusions:

Disclaimer of Consequential Damage and Limitation of Implied Warranties:

Your Warranty Rights And Obligations:
California

Emission Control System Warranty

This warranty does not extend to parts affected or damaged by
accident and/or collision, normal wear, fuel contamination, use in an
application for which the product was not designed, or any other
misuse, neglect, incorporation or use of unsuitable attachments or
parts, unauthorized alteration, or any causes other than defects in
material or workmanship of the product.
Any product that has ever been declared a total loss or sold for
salvage by a financial institution or insurer.

American Honda disclaims any responsibility for loss of time or use of
the product, transportation, commercial loss, or any other incidental or
consequential damage. Any implied warranties are limited to the
duration of this written limited warranty. Some states do not allow
limitations on how long an implied warranty lasts and/or do not allow
the exclusion or limitation of incidental or consequential damages, so
the above exclusions and limitations may not apply to you. This
warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.

Your new Honda Power Equipment engine complies with the U.S. EPA,
Environment Canada, and State of California emission regulations
(models certified for sale in California only). American Honda Motor
Co., Inc. provides the emission warranty coverage for engines in the
United States, and its territories. Honda Canada Inc. provides the
emission warranty for engines in the 13 provinces and territories of
Canada. In the remainder of this Emission Control System Warranty,
American Honda Motor Company Inc. and Honda Canada Inc. will be
referred to as Honda.

The California Air Resources Board and Honda are pleased to explain
the emission control system warranty on your Honda Power
Equipment engine. In California, new spark-ignited small off-road
equipment engines must be designed, built, and equipped to meet the
State’s stringent anti-smog standards.

10/03/11 13:05:00 31ZT3620_076

«
...
75
76
77
78
79
...
»

Summary of Contents for EU 1000i





























































































Reviews:

No comments

Related manuals for EU 1000i

Brand: AA Products Pages: 8

MES ACURAS HEAD

Brand: Barco Pages: 131

Brand: CAME Pages: 4

Brand: Zipp Pages: 39

Brand: Ecco Pages: 9

Brand: Ecco Pages: 9

Brand: Napoleon Pages: 4

Brand: Napoleon Pages: 4

Brand: Napoleon Pages: 2

Brand: Panasonic Pages: 18

Brand: Jabra Pages: 2

Brand: Fenix Pages: 4

Brand: Taffio Pages: 8

Brand: Axxess Pages: 8

Brand: Ikelite Pages: 32

Brand: Ednet Pages: 7

Walimex Pro Operator

Brand: walser Pages: 24

PowerStation Plus

Brand: Mophie Pages: 19

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands