Tyre Puncture
u
Removing Wheels
108
Tr
ou
bles
hoo
ting
4.
Adjust the drive chain.
2
P. 83
5.
Remove the bolts and muffler end cover.
2
P. 84
6.
Install and tighten the rear axle nut.
7.
Install the muffler end cover and bolts.
2
P. 84
8.
Tighten the drive chain adjusting nuts
lightly, then hold the adjusting nuts and
tighten the lock nuts.
9.
After installing the wheel, apply the brake
pedal several times, then recheck the
wheel rotates freely. Recheck the wheel if
the brake drags or if the wheel does not
rotate freely.
10.
Install the parking brake caliper and
tighten the mounting bolts.
u
Take care to prevent the brake caliper
from scratching the wheel during
installation.
u
Use new mounting bolts when
installing the parking brake caliper.
If a torque wrench was not used for
installation, see your dealer as soon as
possible to verify proper assembly.
Improper assembly may lead to loss of
braking capacity.
Torque:
98 N·m (10.0 kgf·m, 72 lbf·ft).
Torque:
21 N·m (2.1 kgf·m, 15 lbf·ft).
Torque:
31 N·m (3.2 kgf·m, 23 lbf·ft).
NOTICE
When installing the brake caliper into position, carefully
fit the brake disc between the pads to avoid scratching
them.
CTX700D only
14 CTX700-32MJF8000.book 108 ページ ２０１３年５月９日 木曜日 午後９時５９分
