25
continued
O
p
er
at
io
n Gu
id
e
D indicator
Comes on when the D mode is selected in the AT MODE.
(P40)
S indicator
Comes on when the S mode is selected in the AT MODE.
Gear position indicator
The gear position is shown in the gear position indicator when the D, S mode or MT MODE
are selected.
u
“-” appears for a few seconds and then goes off when the engine starts.
u
“-” flashes when the engine stop switch position is changed from
(Run) to
(Off) position
with the ignition switch on.
u
“-” flashes when the ignition switch is turned on with the engine stop switch
(Off) position.
The indicator may flash if:
u
The front wheel leaves the ground.
u
You turn the wheel while the motorcycle is upright on the stand.
This is normal. To operate the system again, turn the ignition switch off, then on again.
If the “-” indicator is blinking in the gear position window while riding:
14 CTX700-32MJF8000.book 25 ページ ２０１３年５月９日 木曜日 午後９時５９分
