138 |
| 139
DRIVING
DRIVING
Blind Spot Information*
Is designed to detect vehicles in specified alert zones adjacent to your vehicle,
particularly in harder to see areas commonly known as “blind spots”, when
travelling 20 mph (32 km/h) and higher.
When the system detects vehicles approaching from behind in adjacent lanes,
the appropriate indicator comes on for a few seconds, providing assistance
when you change lanes.
Blind Spot Iformation Alert Indicator:
Located on the outside rearview mirror
on both sides.Comes on when:
• A vehicle enters the alert zone from
behind to overtake you with a speed
difference of no more than 31 mph (50
km/h) from your vehicle.
• You pass a vehicle with a speed
difference of no more than 12 mph (20
km/h).
Blinks and a beeper sounds when:
You move the turn signal lever in the direction of the detected vehicle. The
beeper sounds three times.
n
Changing Settings
Determine the warning type or turn the system off.
1. Press the
HOME
button, select
Settings
.
2. Select
Vehicle
. The vehicle must be in Park (P).
3. Select
Driver Assist System Setup
.
4. Select
Blind Spot Info
.
5. Select an alert type or turn the system off.
6. Press
Save
.
Important Safety Reminder
Like all assistance systems, Blind Spot Information has limitations. Over-
reliance on the system may result in a collision. The system is for your
convenience only.
Failure to visually confirm that it is safe to change lanes before doing so may
result in a crash and serious injury or death. Do not rely only on the blind spot
information system when changing lanes.
Always look in your mirrors, to either side of your vehicle, and behind you for
other vehicles before changing lanes.
WARNING
*if equipped
Comes On
Blinks
The system does not provide alerts for a vehicle that is moving away from your
vehicle and it may not detect pedestrians, bicycles, or stationary objects.
Models with parking sensor system
The parking sensor system’s alerting buzzer overrides the Cross Traffic Monitor
buzzer when the sensors are detecting obstacles at the closest range.
Off icon
An arrow icon appears
on the side of an
approaching vehicle.
Cross Traffic Monitor cannot detect all approaching vehicles and may not
detect an approaching vehicle at all.
Failure to visually confirm that it is safe to back up the vehicle before
doing so may result in a collision.
Do not solely rely on the system when reversing; always also use your
mirrors and look behind and to the sides of your vehicle before reversing.
CAUTION
Cross Traffic Monitor*
Alerts you if a detected vehicle is approaching from a rear corner when your
vehicle is in Reverse (R) at speeds of 3 mph (5 km/h) or lower, which can be
helpful when backing out of parking spaces.
n
Turning the System On or Off
1. Press the
HOME
button, select
Settings
.
2. Select
Camera
.
3. Select
Cross Traffic Monitor
.
4. Select
ON
or
OFF
, then select
Save
.
The system can also be turned on and off on the audio/information screen
by pressing the CTM icon.
When a vehicle is detected approaching from a rear corner, Cross Traffic
Monitor alerts you with a buzzer and a displayed warning.