© 2003 American Honda Motor Co., Inc - All Rights Reserved.
AII 24378 (0303)
9 of 24
Installing the Display Module
18. Attach the display module to the display module
pocket:
•
Using isopropyl alcohol on a shop towel, clean
the center on the back of the display module
where the adhesive backing will attach.
•
Remove the backing from one side of the
double-sided adhesive tape, and attach it to
the display module.
•
Remove the remaining backing from the
double-sided adhesive tape. Route the display
module cable through the hole of the display
module pocket, and attach the display module
to the pocket.
2N28110M
DISPLAY MODULE
Clean with
isopropyl
alcohol.
DOUBLE-SIDED
ADHESIVE TAPE
BACKING
DISPLAY
MODULE
POCKET
PLAYER
With Player
Without Player
DISPLAY
MODULE
POCKET
Routing the XM Radio Harness
19. Remove the beverage holder (pull up to release
the six retaining clip).
20. Remove the rear console.
•
Open the lid, and remove the rear console mat
from inside the rear console.
•
Remove the two screws and four self-tapping
screws, and unplug the connector and harness
clip (if equipped).
•
If equipped with a console-mounted CD
changer, remove the changer from the rear
console.
2206050K
RETAINING
CLIPS (4)
RETAINING
CLIPS (2)
BEVERAGE
HOLDER
2206090K
SCREWS (2)
REAR CONSOLE MAT
CONNECTOR
(If equipped.)
SELF-TAPPING
SCREWS (4)
HARNESS CLIP
(If equipped.)
DISPLAY
MODULE
CABLE
DISPLAY MODULE CABLE
