© 2003 American Honda Motor Co., Inc - All Rights Reserved.
AII 24378 (0303)
5 of 24
3.
Remove the trim ring.
M/T Vehicle:
•
Squeeze the plastic clip, and pull down on the
shift boot. Remove the shift knob by turning it
counterclockwise.
•
Gently pry up on the trim ring to release the six
clips.
•
Unplug the two seat heater connectors
(if equipped), and remove the trim ring.
A/T Vehicle:
•
Gently pry on the trim ring to release the six
clips.
•
Unplug the two seat heater connectors
(if equipped), and remove the trim ring.
4.
Remove the center holder.
•
Open the lid, and remove the coin pocket.
•
Remove the two self-tapping screws.
•
Gently pull out the dashboard center holder to
release the two retaining clips, unplug the
vehicle connector, and remove the center
holder.
2206032K
SHIFT KNOB
(Turn counterclockwise.)
PLASTIC
CLIP
SHIFT
BOOT
2206041K
RETAINING
CLIPS (4)
RETAINING
CLIPS (2)
TRIM
RING
SEAT HEATER
CONNECTOR
(If equipped.)
2206112K
RETAINING
CLIPS (4)
RETAINING
CLIPS (2)
TRIM RING
SEAT HEATER
CONNECTOR
(If equipped.)
2206061K
COIN
POCKET
CENTER HOLDER
SELF-TAPPING
SCREW
RETAINING
CLIPS (2)
LID
VEHICLE
CONNECTOR
With Coin Pocket:
