Parking Brake
To apply the parking brake, pull the
lever up firmly. To release it, pull
up slightly, push the button, and
lower the lever. The parking brake
light on the instrument panel should
go out when the parking brake is
fully released (see page
30
). If you
try to drive the car without fully
releasing the parking brake, the
ABS indicator may come on and
the ABS may not work properly.
Driving the car with the parking
brake applied can damage the
rear brakes and axles.
Digital Clock
The digital clock displays the time
with the ignition switch ON (II).
To see the time with the ignition
off, press and hold the button
below the clock.
To set the clock:
1. Turn the ignition switch
ON (II) to display the time.
2. Swing down the front cover of
the button below the clock
display. You will see H, M,
and RESET buttons.
continued
Instruments and Controls
PARKING
BRAKE
LEVER
H
M
RESET
NOTICE
