Replacing the Battery
When the remote transmitter's
batteries begin to get weak, it may
take several pushes on the button
to lock or unlock the doors, and
the LED will not light. Replace
the batteries as soon as possible.
Battery type: CR2016
To replace the batteries, remove
the screw on the back of the
transmitter, then remove the
bottom cover.
Remove the old batteries and note
the polarity. Make sure the
polarity of the new batteries are
the same (+ side facing up),
then insert them in the transmitter
as shown.
Reinstall the cover to the
transmitter, then install the screw.
Transmitter Care
Avoid severe shock to the
transmitter, such as dropping or
throwing it. Also protect it from
extreme hot or cold temperatures.
Clean the transmitter case with a
soft cloth. Do not use strong
cleaners or solvents that could
harm the case. Immersing the
transmitter in any liquid will harm
the transmitter and cause it to not
function properly.
As Required by the FCC:
This device complies with Part 15
of the FCC rules. Operation is
subject to the following two
conditions: (1) This device may
not cause harmful interference,
and (2) this device must accept
any interference received,
including interference that may
cause undesired operation.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user's authority to
operate the equipment.
Instruments and Controls
BATTERIES
SCREW
