4. Pull up on the shoulder part of
the belt to remove any slack.
Make sure the belt goes over
your collarbone and across
your chest.
5. If the belt crosses your neck,
you need to adjust the belt
anchor height or your
seating position.
Front seats:
Adjust the belt
anchor by squeezing the two
buttons and sliding the anchor
downward (it has four positions).
Rear seats:
Move toward the
center of the seat until the belt
fits over your collarbone.
To unlatch the seat belt, push the
red PRESS button on the buckle.
Guide the belt across your body to
the door pillar. After you exit the
vehicle, make sure the seat belt is
out of the way and will not get
closed in the door.
Driver and Passenger Safety
