5. Put a new washer on the drain
bolt, then reinstall the drain
bolt. Tighten it to 33 Ib-ft
(4.5 kg-m, 44 N.m).
6. Refill the engine with the
recommended oil. Engine oil
capacity (including filter):
LX: 4.0 U.S. qt (3.8 )
EX: 4.5 U.S. qt (4.3 )
7. Replace the oil fill cap. Start
the engine. The oil pressure
indicator light should go out
within five seconds. If it does
not, turn off the engine and
inspect your work.
8. Let the engine run for several
minutes; then, check the drain
bolt and the oil filter for leaks.
9. Turn off the engine, wait for
several minutes, then check
the oil level. If necessary, add
oil to bring the level to the
upper mark on the dipstick.
Improper disposal of engine oil
can be harmful to the
environment. If you change your
own oil, please dispose of the
used oil properly. Put it in a
sealed container, and take it to a
recycling center. Do not discard
it in a waste bin or dump it on
the ground.
Adding Engine Coolant
If the coolant level in the reserve
tank is at or below the MIN line,
add coolant to bring it up to the
MAX line. Inspect the cooling
system for leaks. This coolant
should always be a mixture of 50
percent antifreeze and 50 percent
water. Never add straight
antifreeze or plain water.
continued
Maintenance
NOTICE
Cooling System
RESERVE TANK
MAX
MIN
