14. Lower the vehicle to the
ground, and remove the jack.
15. Tighten the wheel nuts
securely in the same crisscross
pattern. Have the wheel nut
torque checked at the nearest
automotive service facility.
Tighten the wheel nuts to
80 lb-ft (110 N.m).
16. Remove the wheel cover or
center cap. Place the flat tire
face down in the spare tire well.
17. Remove the spacer cone from
the wing bolt, turn it over, and
put it back on the bolt.
18. Secure the flat tire by
screwing the wing bolt back
into its hole.
19. Turn the jack's end bracket
counterclockwise until the
jack is fully collapsed.
Taking Care of the Unexpected
continued