Honda Electronics HE-1501, Operation Manual

Page: 9 / 128

3
3.
HANDLING OF TRANSDUCER AND WATER TEMPERATURE SENSOR
●
Work on the board is too unstable and risky.
Installation and maintenance of transducer and water temperature sensor
should be done after you land and fix the boat.
●
Installation of the transducer or water temperature sensor inside the hull
with adhesive should be done while you ventilate well inside the boat.
Volatile gas from solvent or etc. causes to toxic symptoms.
●
Perfect waterproof treatment should be done when you install the
transducer or water temperature sensor through the hull.
If water proof is not sufficient, it causes to marine disaster because water
comes in.
※
Do not install on the aluminum boat. (It may cause to
corrosion.)
●
When you work using electric tools, please keep your hands dry.
If your hands are wet, It causes to electric shock.
●
When you pull out or insert the plug of transducer or water temperature
sensor, please be sure to turn the power switch off.
It causes to electric shock.
4.HANDLING OF REMOTE
●
Do not use the leaked battery. (When using wireless remote)
When leaked liquid stains on body, it causes to damage.
※
In case of staining, wash out with clean water immediately.
●
Keep at place where it will not drop due to vibration, etc. when it
is not used. It causes to accident like human damage.