Honda Electronics HE-1501, Operation Manual

Page: 8 / 128

2
2. HANDLING OF CABLES
●
Be sure to use the specified power supply cable and fuse.
It causes to heating or firing.
●
Do not leave the power plug as it is while it is pulled out the unit.
If the plug gets wet, it causes to heating or firing due to short circuited.
●
Be sure to wire in order to prevent the cables from interfering to operate
unit. If feet of crews or operating equipments are caught in cables, it
causes to the accident.
※
Do not put the heavy objects on cable or do not
bend cables excessively.
●
Do not disassemble or modify the cables.
It causes to heating, firing or electric shock.
●
Do not use the damaged cables.
It causes to firing or electric shock.
●
Do not pull the cable when you pull out the plug.
It causes to firing or electric shock because the cable is broken.
※
When you pull out the plug, make sure to have it your hand and pull it.
● Do not install at the place where rain or spray dashes directly.
It causes to firing or injuring.
●
Do not install at the place where it becomes hot.
It causes to firing, human damage or electric shock due to increasing
temperature inside the unit.
●
Be sure to ground.
If grounding is poor, it may receive interference from other equipments
or it may provide interference with other equipments.