Honda Electronics HE-1501, Operation Manual

Page: 54 / 128

48
※
Please refer to [HOW TO OPERATE MENU] (
→
page 14) for operation of menu.
TO REGISTER (ERASE) ROUTE
Select [4. ROUTE]
→
[4.ENTER ROUTE] on
menu.
Enter Route number with [NUMBER] key and
press [SET] key.
※
A Route number in red color can not be used
because it has already been registered. Use
other number (white) or erase the route you
don’t need.
Stack cursor on intermediate point (course
change point) with
of CENTER key
and press [SET] key. Designate next inter-
mediate points repeatedly.
“ ● ”
mark is
indicated on each intermediate point and they
are connected in line.
Route registration is completed by pressing [CLR]
key.
【
To erase route
】
Select [4.ROUTE]
→
[3.ERASE ROUTE] on
menu. (
→
page 64)
1
To register (erase) route
【
Route
】
Line connected between intermediate points is called “Route” and it is indicated by
points and lines.
【
Number of registered route
】
You can enter maximum 20 intermediate points (course change points) for one route
and can store up to 20 points. Registered routes are always shown on the wake mode
unless they are erased.
After you select route number on menu, you enter intermediate points (route change
points) in turn while moving the cursor.
2
3
4
CENTER key SET key
CLR key
NUMBER key
NUMBER
key