Honda Electronics HE-1501, Operation Manual

Page: 32 / 128

26
※
Please refer to [HOW TO OPERATE MENU] (
→
page 14) for operation of menu.
Take off card slot cover on the side of main unit.
While the power of unit is turned OFF, insert the
map card into card connector while sticker side
faces ahead.
メ
By turning the power ON, you show the normal
display.
Select [8.OTHERS]
→
[2.MEMORY CARD] on
menu and operate each items. (
→
page 67)
After finished above procedure 4, it returns to
normal display. Then turn the power of unit
OFF and pull out memory card from slot. Finally
put the card slot cover.
1
データのコピー
2
3
Note 1
）
When you insert/take off memory card, make sure to the power of unit OFF.
Note 2
）
Storage of datum in this unit or memory card is not guaranteed to keep
permanently. Important datum should be kept in notebook or others.
Note 3
）
Make sure to face sticker side of card ahead. Otherwise, they are not shown on
the screen. Take care of facing sticker side ahead when inserting card.
Wrong insertion causes to damage.
4
5
【
Memory card
】
Data can be copied between main unit and memory card. Memory card you can use is
limited to our made card.
【
Contents which can be copied
】
・
Wake
・
Event Mark
・
Waypoint
・
Line
・
Route
TO USE MEMORY CARD
Copy of data
Card slot cover
Loosen screw
Take off card slot
cover.
Insert the card.