Honda Electronics HE-1501 Operation Manual Download Page 12

Page: 12 / 128

FEATURES

★

Process of drawing coastlines at high speed!

High performance CPU enables you to draw coastlines at high speed.

★

Keys on panel let you simple operation of various functions

Each operation key are located at best position to operate efficiently.
Optional remote enables you to operate various functions easily at your hand.

※

It can be used as wireless one if you remove cable.

Only when wireless remote is used, it operates with internal battery. It helps

to save power consumption.

★

Many information!

You can save up to 1,000 points of waypoints, up to 24,000 points of event marks
and up to 32,000 points of wakes. It is easy to distinguish the wakes, waypoints
and event marks as they are shown in color.

★

Two stations available (Optional)!

★

Compact GPS antenna is applied.

★

Date, Depth, Water Temperature can be indicated with Event Mark

★

RGB input connector is prepared (HE-1501, HE-1502).

Image from external camera, etc. can be displayed.

Summary of Contents for HE-1501

































































































































Search results

Summary of Contents for HE-1501

Reviews:

Related manuals for HE-1501

Brands by name

Popular brands

Honda Electronics HE-1501, Operation Manual

Search results

Summary of Contents for HE-1501

Reviews:

Related manuals for HE-1501

Brands by name

Popular brands