11
12
SMS Command “0”: Disarm
Send:
Send:
SMS Command “1”: Arm
SMS Command “2”: Arm Home Mode
Send:
Nota Bene:
If the SIM card is inserted for the first time and the system is not yet
programmed, the “0” disarm command is accepted by any number
that generates the message.
After the first complete programming only the commands generated
by the telephone numbers stored in the system will be recognised.
The “0” command disarms the alarm system.
The protected levels can now be accessed.
All the sensors are disarmed except for the sensors programmed in
H24 Mode that will always stay armed.
If the system is armed with the alarm inserted, the siren will stop and
the SMS messages and the composition of telephone calls will be
interrupted.
System disarmed.
The “1” command arms the alarm system.
All the sensors are armed.
The “2” command arms the alarm system in home mode.
Only the peripheral sensors are armed.
