19
20
Entrance Door Sensor
Forward>Edit
Send: 91
The “9” command changes the names of the first 9 zones recognised
by the first 9 detectors installed in sequential order (e.g. detector 1 =
zone 1, detector 2 = zone 2, etc.)
Each line of the message can contain a maximum of 30 characters
(limit imposed by the SMS messages).
The names of the subsequent 41 zones are fixed and follow the
nomenclature Zone 10 alarm, Zone 11 alarm, etc.
SMS Command “9
1
~9
9
”: Change Zone Name
9
1
Zone2 name: Living room PIR
Forward>Edit
Send: 92
9
2
Zone2 name: Zone 2 alarm
Zone1 name: Zone 1 alarm
Change zone name
successfully.
Change zone name
successfully.
As programmed, the control panel immediately identifies the alerted
or tampered sensor.
If the alarm system has a large number of sensors/zones, it is recom-
mended to write down the zone number corresponding to the detec-
tor to be able to be recognised immediately in the case of alarms.
Repeat command 93, 94, 95, etc. for the zones to be followed.
