35
36
Tamper Switch
Zone Mode
Jumper Setting
Battery
Door / Window Sensor HD-W100
LED Indicator
Transmitter
Magnet
The door / window magnetic contact can be mounted on doors,
windows and anything else that opens and closes.
It consists of a central unit, transmitter with magnetic switch, and a
magnet.
When the magnet is separated from the central unit, the latter will
transmit the change of status to the control panel.
It is also provided with tamper switch that will protect the central unit
from sabotage attempts by triggering the alarm, sound the siren,
send SMS and call the programmed numbers.
Note:
every time a door or window is opened the LED indicator will
flash once as a sign that the sensor is transmitting its status to the
control panel.
N.B.:
if the LED indicator stays on the battery is discharged. Replace
the battery immediately.
External View
Internal View
Installation
Remove the battery protection strip.
Position the transmitter on the door frame and the magnet on the
door.
Make sure that the magnet is always to the right of the transmitter.
Make sure that the magnet is no more than 1cm from the transmitter.
Fix the transmitter and the magnet with double-sided tape or with
screws as appropriate.
Avoid positioning the sensor in areas with large metallic structures or
electrical equipment such as the boiler or meter areas
•
•
•
•
•
•
Transmitting Distance:
≤
80 m (open area)
Transmitting Frequency:
315 MHz / 433 MHz (± 75 KHz)
Housing Material:
ABS Plastic
Operative Conditions :
Temperature: -10ºC ~ 55ºC
Umidity:
≤
80% (non-condensing)
Dimensions (L x W x D):
Transmitter: 71 x 34 x 17.5mm
Magnet: 51 x 12 x 13.5mm
Product Name:
Door/Window Magnetic Contact
Model:
HD-W100
Power Supply:
DC 1.5V (Battery AA 1.5V LR6)
Stand-By Current:
≤
30
μ
A
Alarm Current:
≤
40 mA
Specifications
