WIRELESS ACCESSORIES:
the alarm system kit includes 1 magnetic
door/window sensor and 1 PIR movement sensor already connected
to the control panel and configured as follows:
- magnetic door/window sensor: Zone 1 – Delay Mode
- PIR motion sensor: Zone 2 – Normal Mode
Before pairing further sensors to the control panel it is recommended
that their positioning is planned so that every sensor corresponds to
a zone that can then be named according to where it is positioned
(only the first 9 accessories).
Pairing Procedure:
- Enter on the panel the password of 4~6 digits and touch
- The LED will light up.
- Arm the accessory within 15 seconds.
The connection will be made after the confirming beep.
Two beeps indicate that the accessory had already been connected.
The wireless accessories added to the kit subsequently will follow the
sequential zone numbering: the first additional accessory is
connected to zone 3, the second to zone 4, etc.
RFID TAGS:
the alarm system kit includes 2 RFID Tags already
connected to the control panel.
Pairing Procedure:
- Enter on the panel the password of 4~6 digits and touch
- The LED will light up.
- Position the RFID device near the reader within 15 seconds.
The connection will be made after the confirming beep.
Two beeps indicate that the RFID device had already been connected.
It is recommended that the sequence is noted with which the first 4
devices are added in order to be able to rename them (SMS
command “10”).
27
28
Arm and Disarm with Phone Call
Wireless Pairing Procedure
Disarm
Call the number of the control panel and wait until the panel hangs
up. The panel will not call back.
The system is now disarmed.
Arm
Call the number of the control panel and hang up when you hear it
ringing. You will be called back. Answer and hang up.
The system is now armed.
