Setting Zone Mode
Home Mode Zone
Normal Mode Zone
Delay Mode Zone
24H Mode Zone
Arm / Disarm in Silence
Emergency
In order not to disturb anyone the alarm system can be armed and
disarmed in silence without hearing the beep of the siren.
To Arm in silence press simultaneously the keys +
To Disarm in silence press simultaneously the keys +
No matter what state the Control Panel is in, when the
SOS
key on the
remote control is pressed the system activate the emergency proce-
dure: sound the siren, send SMS and call the programmed numbers.
It is possible to set three different zone modes in the system:
1. Home Zone Mode: set on the PIR motion sensors within the rooms of
the premises.
2. Normal Zone Mode: set on all the other sensors.
3. Delay Time Zone Mode: set on the door/window sensor on the main
entrance.
N.B.:
after each jumper setting modification it is necessary to reconnect
the modified sensor to the control panel.
33
34
Note:
for detectors such as smoke,
gas, water sensor it is recommended
to position the jumper setting in 24
Hour Zone Mode.
The system will then be armed at all
time only for those specific sensors
that, if set off, will trigger the alarm,
sound the siren, send SMS and call the
programmed numbers.
Every sensor can be set in such a way that it can respond to the type of
anti-intrusion required mode.
To do this it is necessary to set the jumpers located close to the battery on
each sensor.
The jumper setting will reflect the operation mode chosen on the control
panel.
