manualshive.com logo in svg

Home Wireless Networks HWN500, Reference Manual

Share
Download
Home Wireless Networks HWN500 Reference Manual Download Page 98

96

•

Regulatory

3 5 ( / , 0 , 1 $ 5 <    Y     

This equipment generates, uses, and can radiate radio frequency 
energy, and if not installed and used in accordance with the 
instructions, may cause harmful interference to radio 
communications. However, there is no guarantee that interference 
will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of the 
following measures.

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that 
to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for 
help.

This device complies with Part 15 of the FCC Rules. Operation is 
subject to the following two conditions:

1.

This device may not cause harmful interference.

2.

This device must accept any interference received, including 
interference that may cause undesired operation.

Note: Privacy of communications may not be ensured when using 
this phone.

Summary of Contents for HWN500













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands