Before you begin
•
9
3 5 ( / , 0 , 1 $ 5 < Y
Installation sequence
Network components must be installed in the following order:
1.
Controller (see page 13);
2.
Data Jack (see page 25) or Handset (see page 30);
3.
Phone Jacks (see page 45).
Safety instructions
When using your telephone equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric
shock, and injury.
1.
Read and understand all instructions.
2.
Follow all warnings and instructions marked on the product.
3.
Do not use this product near water or when you are wet (for
example, near a bath tub, kitchen sink, laundry tub, wash
bowl, wet basement, or swimming pool). Unplug this product
from the wall outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
Do not plug the product back in until it is thoroughly dry.
4.
Avoid using a telephone (other than a cordless one) during
an electrical storm. There may be a remote risk of electric
shock.
5.
Do not use a telephone in the vicinity of a gas leak. If you
suspect a gas leak, report it immediately using a telephone
located away from the area where the gas is leaking. Also
make sure the Controller unit is located away from the area of
the suspected leak.
6.
This product should be operated only from the type of power
source indicated on the marking label. If you are not sure of
Summary of Contents for HWN500
Page 102: ...100 Warranty Information 3 5 0 1 5 Y Warranty Information ...
Page 107: ......
