74
•
System Administration via the Handset
3 5 ( / , 0 , 1 $ 5 < Y
Specifying Tone or
Pulse dialing for a
particular line
You can specify either tone or pulse dialing
for all outgoing calls on a particular line. All
calls dialed out on that line from either a
handset or a device connected to a Phone
Jack will use the specified dialing type.
Procedure
1.
Press MENU until you reach the screen
containing the Setup function.
2.
Press 9 (Setup).
3.
Enter your system password, then press
END.
4.
Press 2 (Network).
5.
Press 3 (Lines)
6.
Select the desired line number.
7.
Press 4 (Tone) to toggle between Tone
and Pulse dialing.
Defining Dialing Rules
Dialing Rules tell the system how to dial local
and long-distance calls (for example, when
to dial “1” before an area code). These rules
were established during installation of the
first handset (unless specified first from a PC
connected to the network via a Data Jack).
You may find if necessary to change your
system’s dialing rules from time to time (for
instance, if a new area code is added to your
local dialing area).
Summary of Contents for HWN500
Page 102: ...100 Warranty Information 3 5 0 1 5 Y Warranty Information ...
Page 107: ......
